background image

Via Settembrini, 34 - 20020 Lainate (MI) - ITALIA

Tel. +39.0258077.1  Fax +39.0258077.277 

http://www.paso.it  E-mail: [email protected]  • 06/17 • UDT - 11/733-A

S.p.A

GARANZIA

Questo prodotto è garantito esente da difetti nelle sue materie prime e nel suo montaggio; il periodo di garanzia è regolamentato dalle norme vigenti. 
La Paso riparerà gratuitamente il prodotto difettoso qui garantito se il difetto risulterà essersi veri

fi

 cato durante l’uso normale; la garanzia non si estende 

quindi a prodotti usati ed installati in modo errato, danneggiati meccanicamente, danneggiati da liquidi o da agenti atmosferici. Il prodotto, risultato 
difettoso, dovrà essere inviato alla Paso franco di spese di spedizione e ritorno. Questa garanzia non ne comprende altre, esplicite od implicite, e non 
comprende danni o incidenti conseguenti a persone o cose. Contattare i distributori PASO della zona per maggiori informazioni sulla garanzia.

Importante! 

L’utente ha la responsabilità di produrre una prova d’acquisto (fattura o ricevuta) se vuole servirsi dell’assistenza coperta da garanzia. Dovrà 

inoltre fornire data di acquisto, modello e numero di serie riportati sull’apparecchio; a questo scopo, compilare come promemoria dei dati richiesti lo spazio 
qui sotto.

MODELLO: .........................................................................................................................................................................................................................

NUMERO DI SERIE: ..........................................................................................................................................................................................................

DATA D’ACQUISTO: ...........................................................................................................................................................................................................

WARRANTY

This product is warranted to be free from defects in raw materials and assembly. The warranty period is governed by the applicable provisions of law. Paso will repair 
the product covered by this warranty free of charge if it is faulty, provided the defect has occurred during normal use. The warranty does not cover products that are 
improperly used or installed, mechanically damaged or damaged by liquids or the weather. If the product is found to be faulty, it must be sent to Paso free of charges for 
shipment and return. This warranty does not include any others, either explicit or implicit, and does not cover consequential damage to property or personal injury. 
For further information concerning the warranty contact your local PASO distributor.

Important!

 Should the user wish to avail himself of servicing under the warranty, he must provide evidence of the purchase (invoice or receipt). The user 

shall also indicate the date of purchase, model and serial number indicated on the equipment. For this reason, you should complete the box below as a 
reminder of the data required.

MODEL: ..............................................................................................................................................................................................................................

SERIAL NUMBER: .............................................................................................................................................................................................................

PURCHASE DATE: ............................................................................................................................................................................................................

GARANTIE

Für dieses Produkt wird eine Garantie für Rohmaterialfehler und Montagefehler gewährt; die Garantiezeit unterliegt den gültigen gesetzlichen 
Bestimmungen. Paso repariert das  garantierte Produkt kostenlos, wenn sich herausstellt, dass der Defekt während des normalen Gebrauchs 
aufgetreten ist; die Garantie erstreckt sich demnach nicht auf Produkte, die falsch gebraucht und installiert oder mechanisch, durch Flüssigkeiten oder 
Umweltein

fl

 üsse beschädigt wurden. Das defekte Produkt muss franco Versandkosten für den Hin- und Rücktransport zu und von Paso gesendet 

werden. Diese Garantie schließt keine weiteren, expliziten oder impliziten Leistungen und Folgeschäden an Personen, Gegenständen oder Unfälle 
ein. Bitte wenden Sie sich an PASO-Fachhandel in Ihrer Gegend, wenn Sie weitere Informationen zu dieser Garantie wünschen.

Wichtig!

 Der Kunde muss einen Verkaufsbeleg (Rechnung oder Quittung) vorlegen, wenn er Serviceleistungen, die unter die Garantie fallen, in Anspruch 

nehmen möchte. Er muss zu diesem Zweck außerdem das Kaufdatum angeben sowie das Modell und die Seriennummer, die auf dem Gerät vermerkt sind.  
Diese Daten müssen in den unten stehenden Textkasten eingetragen werden.

MODELL: ............................................................................................................................................................................................................................

SERIENNUMMER: .............................................................................................................................................................................................................

DATUM DES ERWERBS: ..................................................................................................................................................................................................

Questo prodotto è conforme alle Direttive della Comunità Europea sotto le quali lo stesso ricade.
This product is in keeping with the relevant European Community Directives.
Dieses Produkt entspricht den diesbezüglichen EU-Richtlinien.

Содержание PMD Series





























Отзывы: