-
PMS2000 System
-
Ref.
11/620
PM2024-B
8
4.
IMPOSTAZIONI ED USO
Il menu di gestione è accessibile tramite il
pulsante
<
(
2
).
La rotazione consente di scorrere nei 4 menu
principali:
•
Output Selection
[
Out.S
]
•
Output Level
[
Out.A
]
•
Contact
[
Cont
]
•
Configuration
[
Conf
]
Da questi menu è possibile accedere ai livelli
inferiori, per arrivare a definire la singola
funzione. Sul display viene riprodotto in modo
scorrevole il completo nome del menu
visualizzato. La scritta scorrevole viene attivata
automaticamente e per una sola volta dopo
circa 4 secondi che si è entrati nel menu.
L’utilizzo della tastiera è assai semplice ed
intuitivo; dopo aver effettuato l’accesso ai menu
tramite il tasto
<
(
2
), dalla schermata di default,
con lo stesso comando è possibile scorrere tra
i quattro menu principali.
All’interno del primo livello di navigazione è
possibile, premendo il tasto
OK
(
3
) entrare
all’interno del sottomenu (secondo livello di
navigazione): a seconda della funzione svolta,
si troveranno dei sottomenu con i quali sarà
possibile applicare la stessa logica di
navigazione.
Dopo aver individuato la funzione cercata
ed averne modificato l’impostazione, la scritta
scorrevole “
Stored
” darà conferma
dell’avvenuta modifica.
Tutti i menu riconoscono il pulsante “
Return
”
(
5
) come comando “sali di un livello”.
Analizziamo qui di seguito le funzioni abilitate
da ciascun menu.
4.
SETTINGS AND USE
The management menu is accessed by pressing
the < (2) key.
It is possible to rotate through the 4 main
menus:
•
Output Selection
[
Out.S
]
•
Output Level
[
Out.A
]
•
Contact
[
Cont
]
•
Configuration
[
Conf
]
Inside each of these menus it is possible to
access the lower levels, down to definition of a
single function. The full name of the menu
shown will run across the display.
This wording is activated automatically and once
only, about 4 seconds after entering the menu.
The keypad is simple to use and intuitive.
Once the menu has been accessed by pressing
the < (
2
) key, the same command can be used
from the default screen to browse through the
four main menus.
Inside the first navigation level it is possible to
enter the submenu (second navigation level)
by pressing
OK
(
3
).
Depending on the function in question, there
will be submenus to which the same navigation
logic applies.
After identifying the function required and
changing its setting, the wording “
Stored
” will
run across the display to confirm that the
change has been made.
All the menus recognise the “
Return
” (
5
) key
as an “up one level” command.
The functions enabled by each menu are
analysed below.
Содержание PM2024-B
Страница 35: ... PMS2000 System Ref 11 620 PM2024 B 35 ...