+
+
9 TRIMMASTER 16A ANGLED BRADDER MANUAL
TRIMMASTER 16A ANGLED BRADDER MANUAL 10
PREPARING AND USE OF TOOL
ADJUSTING THE DEPTH OF DRIVE - THUMB WHEEL ROTATION
Counter
Sunk
Proud
INCREASE
DEPTH OF DRIVE
DECREASE
DEPTH OF DRIVE
TOOL FIRING SEQUENCE
1000/hour max fire rate / 2-3 nails a second / -3ºC to 40ºC
BANG!
1
2
3
4
Depress work contact tip
Actuate trigger, tool fires
Allow tool to recoil off
work surface, work
contact is released
With trigger released, tool
will reset for next shot -
sequential operation
CORRECT BATTERY OPERATION
ON/OFF SWITCH. Battery has 2 secure lock positions:
engaged and disengaged. Press in to engage battery.
OFF
OFF
ON
ON
Green indicates
charged battery
Red indicates battery
needs recharging
BZZZZZ
ALWAYS WEAR EYE AND HEARING PROTECTION
49°
+
+
Counter
Sunk
TROUBLESHOOTING
FIRING THE TOOL
Tool Working Correctly
Fan starts - Tool Fires
PROBLEM:
No fan and
does not fire
SOLUTION:
• Check for flat battery
• Remove and reinsert battery to reset tool
• Check for flat battery and recharge battery
PROBLEM:
Fan runs but tool
does not fire
SOLUTION:
• Check for empty fuel cell, flat battery, clogged filter or dirty spark plug
• Clean and oil tool
• Check driver blade returned to top of cylinder
PROBLEM:
Fan runs, tool fires,
no nail fed.
SOLUTION:
• Remove jammed nail
• See instruction below
BZZZZZ
BANG!
BANG
BZZZZZ
BANG
BZZZZZ
BZZZZZ
BANG!
49°
ALWAYS REMOVE BATTERY,
FUEL CELL AND FASTENERS
WHEN SERVICING OR CLEARING A JAM.
