GENERAL SAFETY INSTRUCTIONS
■
IMPULSE SYSTEM :
■
The IMPULSE system is made up of:
the tool, the gas cartridge, the battery and
its charger, the set of fasteners. As regards
safety, the tool, the fasteners and the
gas cartridges referred to in the Paslode
documents must be considered as a single,
complete system.
Eu ropean standard EN 792-13 : 2000
(§ 7.2.5 a)
■
Only the fasteners referred to in the
operating instructions may be used with the
machine.
■
Only the lubricants and the main energy
source laid down in the operating instructions
may be used.
■
For the maintenance of the machines,
only spare parts speci
fi
ed by the
manufacturer or his authorized agent
must be used.
■
Only quali
fi
ed persons may use the
Paslode Impulse nailing system. These
persons must know perfectly how the
tool works and must follow exactly the
manufacturer’s instructions and the safety.
They must be capable of carrying out the
regular servicing on the tool.
■
The tool must be checked before use. It
must be loaded only just before it is used.
If it is not used, it is essential to remove:
the battery, the gas cartridge, the nails
remaining in the magazine, and to put it in
its original box.
■
When using the tool, never point it at yourself or anyone
else. If the operator has to move, the gun must be pointed
downwards, taking one’s
fi
nger off the trigger.
■
The tool must be used in a well-ventilated place. The
inhalation of burnt exhaust gas (carbon monoxide) is a
danger to health. Keep the tool away from heat sources as
the gas cartridge could be damaged.
■
Do not smoke when handling the gas cartridge, Keep the
metering valve ori
fi
ce away from your face and eyes. Do not
inhale its contents.
■
Only use the tool for the nailing applications for which it
was designed by the manufacturer.
■
At the moment of
fi
ring, the operator must be in a stable
position, holding the tool as far as possible at right angles to
the base material.
■
The operator must ensure that there is no-one in the
immediate vicinity of the
fi
ring area. Check the work place
and environment.
■
If a
fi
ring malfunction occurs, keep the tool on the work
surface and
fi
re again. If there is another failure, remove
the battery immediately and examine the tool. If several
incidents occur, inform the manufacturer.
■
When using the tool, the operator and the people around
him must wear appropriate individual protection: goggles,
safety helmet and ear protectors, etc.
■
Never operate the tool resting on the
fl
at of the hand. The
nailer must be operated only when it is in contact with the
material to be
fi
xed. For thin parts to be
fi
xed, make sure
that the tool is correctly adjusted and position it so that the
fastener is aimed towards the base wood.
■
The temperature of the burnt gases and of the tool may
increase depending on
fi
ring frequency. Observe the use
rates given on the data sheets and use gloves to avoid
contact with the hot parts of the tool.
■
The condition of the tool must be checked at least
once a year by the manufacturer or his authorized agent.
We recommend that you carry out regular maintenance
(cleaning and greasing) so as to keep the tool in perfect
operating condition.
■
It is prohibited to make any modi
fi
cation to the tool,
gas cartridge or battery other than those speci
fi
ed by the
manufacturer.
Содержание IM350+ Lithium
