Paslode IM250 F-16 II Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 20

Paslode IM250 F-16 II Скачать руководство пользователя страница 14

13

Impulse

®

Finish Nailer Operation

Depth of Drive Adjustment

Remove the battery before adjusting the depth of drive.

The depth of drive adjustment is made by turning the
adjustment knob on the work contacting element.

Adjust the work contacting element to get the nail head
depth to meet job requirements.

PRESS WORK –
CONTACTING
ELEMENT
AGAINST THE
WORK SURFACE.

Fan motor starts,
fuel is injected into
combustion
chamber and
mixed with air by
the fan.

SQUEEZE
TRIGGER
Spark plug sparks
and fuel/air mixture
ignites.
Combustion
powers piston
assembly driving
fastener.

LIFT TOOL -
RELEASE
TRIGGER
Combustion
chamber opens.
Fan exhausts hot
gases and cools
internal
components.

➔

Turn adjustment
knob in either
direction

DANGER

The work contacting element and nose will become hot
after prolonged or rapid use. If it becomes necessary to
adjust the work contacting element, avoid touching with
bare hands.

NOTE

The nailer will "blank fire" or cycle even if the
magazine is empty of nails. Blank firing will create
driver blade marks on the workpiece, and excessive
impact on the bumper which may result in premature
failure of the bumper.Therefore, load the Paslode
Cordless Finish Nailer when required and only cycle
it when nails are in place.

P

P

«
...
12
13
14
15
16
...
»

Содержание IM250 F-16 II





















Отзывы:

Нет отзывов