![background image](http://html1.mh-extra.com/html/paslode/cr175c/cr175c_operating-manual_761498009.webp)
8
Battery and Charging System
Inserting Battery
1. Load the battery, contacts first, into the Cordless
Roofing Nailer.
2. Push battery down into its locked position.
3. To remove battery, push in on locking tab and slide
battery out.
NOTE: If battery is left in tool for an extended period, the
battery will discharge completely and will require recharging.
IMPORTANT: Should your battery terminals become
corroded and cause poor electrical contact, clean the
terminals using a soft cloth.
Battery Indicator Light
On the right side of the handle is a small plastic lens. This
is the battery indicator light. When you insert a fully-charged
battery into the tool, you will see a blinking green light. If the
indicator light blinks red, recharge the battery.
Clean the
contacts
BATTERY INDICATOR LIGHT
BATTERY INDICATOR LIGHT