![background image](http://html1.mh-extra.com/html/paslode/cr175c/cr175c_operating-manual_761498016.webp)
15
Servicing
Air Filter
Open the grille by pressing slightly above the adapter and
pivoting the cover open. The air filter simply lifts out.
Tap the filter GENTLY to remove any dust. Check and clean
the air filter every two days. Soap and water restores the
filter to a "like new" condition.
End-of-Workday Routine
These simple steps are based on maintaining the safety
and operational efficiency of the Cordless Roofing Nailer.
Before you leave the work site:
2. Dispose of all empty fuel cartridges. Remember to
dispose of these cartridges where they will not be
crushed, punctured, burned or found by children.
When you get home:
1. Place the battery in its charger if it needs charging as
indicated by the red charge light on the handle.
2. Wipe your Cordless Roofing Nailer with a clean, soft
cloth.
3. Remove and clean the filter every two days.
Paslode Cordless Tool Accessories
A variety of accessories are available for the Paslode
Cordless Roofing Nailer:
Battery - Part No. 404717
Clear Safety Glasses - Part No. 401382
Paslode Cordless Lubricating Oil - Part No. 401482
Battery Charger Kit - Part No. 900200
Automotive Adapter - Part No. 900507
Contact your Paslode
®
representative for additional
information.
Tools
Paslode Backpack tool Case - Part No. 904592
Paslode Cordless Tool Cleaner - Part No. 219348
Tool Safety Tether - Part No. 904548
A 5/32 Hex Wrench (Part No. 401331), 9/64 Hex Wrench
(Part No. 900736), and a 3/16 Hex Wrench ( Part No.50144)
are provided with each cordless roofing nailer.
4. Check work contacting element and the nail feed area to
ensure it is operating
freely. Remove any tar build-up
with Paslode Cordless Tool Cleaner.
GRILLE
FILTER
CAP
CAP
GRILLE
FILTER
1. Remove battery and fuel cell and store in the tool
case. Always use the Cordless Roofing Nailer case
for transporting and storing the tool.