PASI GEA24 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 59

PASI GEA24 Скачать руководство пользователя страница 8

8

3.

Warranty and safety instructions

Read these instructions carefully before using the product:

-

Warranty will be void, if the product is used in any ways that is in contradiction

with the instructions given in this manual.

-

Warranty will be void if the seismograph has been tampered with.

-

The device must be used only according to the instructions described in this

manual. Faultless and safe operation of the device can be guaranteed only if the

transport, storage, handling and operation of the device is appropriate.

-

To prevent damage, use only original accessories or approved by PASI srl.

-

The box is waterproof only if closed. When a suitable location has been selected

for the seismograph, it must be ensured that no water can get into the device under

any conditions. Direct sunlight is also to be avoided for long period. It is not

recommended that the seismograph is installed on a strongly vibrating surface.

«
...
6
7
8
9
10
...
»

Содержание GEA24




























































Отзывы:

Нет отзывов