PASI GEA24, Руководство пользователя

Страница: 25 / 59

GEA24 SEISMOGRAPH 25
Full description of graphical interface and functionality
500 us μs - 2000 HZ
1 ms - 1000 Hz
2 ms - 500 Hz
4 ms - 250 Hz
8 ms - 125 Hz
16 ms - 62,5 Hz
T
ABLE
5 - A
VAILABLE PERIODS AND SAMPLING RATES
- Pretrigger T: you must enter the time in milliseconds during which you want to
acquire the signal prior to the trigger shot.
- Acquisition T: you must enter the time in milliseconds during which you want to
acquire the signal subsequent to the release of the trigger.
- Trigger Sensibility: the type of trigger sensitivity must be configured so that it
actually triggers the acquisition.
Trigger sensibility
Very high
High
Medium
Low
Very Low
T
ABLE
6
–
T
RIGGER SENSITIVITY
- Stacking: you must enter the number of stacks that you want to accomplish for the
acquisition. During signal visualization after acquisition it will also be possible to
decide to carry out more stacking in addition to that configured in this window.
- Acquire trigger: the trigger signal will be acquired displayed and saved by ticking
the checkbox, otherwise it will not be acquired, displayed and saved.
- High Pass Filter, Notch Filter (Suppress harmonics, if checkbox selected), Low
Pass Filter: You can configure the filters that will be applied to the acquired signal.