®
M o d e l N o . W A - 9 8 9 7
T e c h n i c a l S u p p o r t
4
To empty the tank, place a container under the drain pipe and open the tube clamp. When the water stops
flowing, raise the corner of the tank opposite to the drain hole so the rest of the water will drain out. Leave
the tube clamp in the open position.
Be careful to get as much water out of the foam beaches as possible. Press with your thumbs against the
foam to squeeze the water out. Next, press a rolled-up towel onto the foam beaches to soak up any remaining
water.
Dry the glass plate completely so that water spots won’t form on the plate. To clean the glass plate or the
reflector, use a soft cloth moistened with water and then dry with a clean towel. Do not use soap or chemical
cleaners.
Technical Support
For assistance with any PASCO product, contact PASCO at:
Limited Warranty
For a description of the product warranty, see the PASCO catalog.
Copyright
The PASCO scientific 012-10034B
Ripple Tank Instruction Sheet
is copyrighted with all rights reserved. Permission is
granted to non-profit educational institutions for reproduction of any part of this manual, providing the reproductions are
used only in their laboratories and classrooms, and are not sold for profit. Reproduction under any other circumstances,
without the written consent of PASCO scientific, is prohibited.
Trademarks
PASCO and PASCO scientific are trademarks or registered trademarks of PASCO scientific, in the United States and/or in
other countries. All other brands, products, or service names are or may be trademarks or service marks of, and are used
to identify, products or services of, their respective owners. For more information visit www.pasco.com/legal.
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone:
916-786-3800 (worldwide)
800-772-8700 (U.S.)
Fax:
(916) 786-7565
Web:
www.pasco.com
Email:
