SPARK LXi Datalogger
PS-3600
3
012-15926A
•
PASPORT Interface ON/OFF Button and LED Indicator:
To turn the interface on, press the Interface ON/OFF button.
To turn the interface off, press and
hold
the ON/OFF button. The interface stays awake when the data collection
software is being used, and puts itself to sleep after a period of inactivity.
Setting Up the SPARK LX/LXi
Press the Help icon on the Home Screen and refer to the Onboard help system for help with the following topics:
Setting Up WiFi for Use with PASCO Lab Manager
• All devices must be connected to the same wi-fi network.
• “Broadcast packets” must be enabled on the wi-fi network. This setting may need to be enabled by your
network administrator. Refer to the Onboard help for network settings.
Connecting Sensors
Wireless
- Connect to the device wirelessly through the PASCO Data Collection Software.
PASPORT
- Plug a PASPORT Sensor into one or both of the PASPORT Input Ports. The PASCO
software will automatically identify the sensor.
If PASPORT sensors are not detected by the device, press the interface ON/OFF button and verify that the
interface LED blinks green (interface is awake).
•
Voltage Probe - Plug the Voltage Probe into the Voltage Input Port.
•
Fast Response Temperature Probe - Plug the probe into the Temperature Probe Port.
Desired Outcome
ON/OFF Button Action
LED Behavior
Turn Interface ON
Press the ON/OFF Button
Red->Yellow->Green->OFF
Turn Interface OFF
Press and HOLD the ON/OFF Button
Green Blink (3 times)->Red
Awaken the interface Press the ON/OFF Button
Green Blink one time
Confirm that it is ON
Briefly press the ON/OFF Button
Green Blink two times
•
Configuring the Desktop
•
Datalogger’s Design and Default Settings
•
Lab Manager Teacher
•
Lab Manager Student
•
PASCO Applications
•
SPARK LXi Interface
PASPORT
Sensor
PASPORT
Sensor Plug
