SE-9654
Zeeman Effect Experiment
4
012-14266B
• Do not use the equipment if it operates abnormally. Protection may be impaired. When in doubt, have the equipment
serviced.
• Do not operate the equipment where explosive gas, vapor, or dust is present. Don't use it under wet conditions.
• Do not apply more than the rated voltage, as marked on the apparatus, between terminals or between any terminal
and earth ground.
• When servicing the equipment, use only specified replacement parts.
• Use caution when working with voltages above 30 V AC rms, 42 V peak, or 60 V DC. Such voltages pose a shock
hazard.
• To avoid electric shock, do not touch any bare conductor with hand or skin.
• Adhere to local and national safety codes. Individual protective equipment must be used to prevent shock and arc
blast injury where hazardous live conductors are exposed.
• Special note: If a dangerous voltage is applied to an input terminal, then the same voltage may occur at all other
terminals.
Electrical Symbols
Alternating Current
Direct Current
Caution, risk of danger, refer to the operating manual before use.
Caution, possibility of electric shock
Earth (ground) Terminal
Protective Conductor Terminal
Chassis Ground
Conforms to European Union directives.
WEEE, waste electric and electronic equipment
Fuse
On (Power)
Off (Power)
In position of a bi-stable push control
Out position of a bi-stable push control