SE-9654
Zeeman Effect Experiment
24
012-14266B
3. Click the icon (
) in the center of the upper left display and select “Table” from the pop-up.
Setup Table 1
4. Click the Table display where it says “Table title here” and label this table: “Table 1: B = 0 Data”. Add a third column to
the table by clicking the “Insert empty column to the right” icon ( ) at the left end of the table toolbar one time.
•
NOTE: Table 1 is where the ring numbers will be listed and the measured values of R will be entered.
Figure 21: Select Table from the menu
Figure 22: Label the Table and add a Column
“Label table here”
“Insert
empty
column”
icon