background image

Figure 1. A setup showing the fiber optic cable installed in the UV-VIS

Spectrometer and pointed at a light source.

Analyz

Analyze Emission Spectr

e Emission Spectraa

Determine the wavelengths of light emitted from sources such as gas
spectrum tubes.

Note: The SE-7182 Fiber Optic Cable Kit is required to perform

this procedure.

Setup

Setup

1. Insert the fiber optic cable into the reflective cuvette.
2. Place the nut on the cable over the threads in the cuvette and

turn the nut until finger tight.

3. Insert the reflective cuvette into the UV-VIS Spectrometer. Align

the triangle on the cuvette with the notch on the test chamber
(Figure

Figure 11).

CAUTION: It is important that the cuvette is aligned

correctly. Incorrect alignment may result in the fiber optic cable
pointing at the UV light source instead of the light sensor.

4. Point the other end of the fiber optic cable at a light source.

Tip: Attach the end of the cable to a stand. Place the probe

as close to the source as possible without touching the source.

Collecting Data

Collecting Data

1. Open the Spectrometry app.
2. Connect the UV-VIS Spectrometer to Spectrometry.
3. Select Analyze Light

Analyze Light

.

4. Click Record

Record

.

Tip: Click Auto Set

Auto Set under Integration Time

Integration Time if the data is too

noisy.

5. Click Stop

Stop

to keep the data.

6. Use the Coordinates Tool

Coordinates Tool

to measure peak wavelengths.

Spectr

Spectrometr

ometry Softwar

y Software Help

e Help

Additional information on how to use the Spectrometer can be found
in the Spectrometry Help.

• Spectrometry

Spectrometry: Click

then select Help

Help.

• Online

Online: Go to pasco.com/help/spectrometry

pasco.com/help/spectrometry.

Additional Information

Additional Information

Visit the product web page at
pasco.com/product/se-3607

pasco.com/product/se-3607 for additional
information including:

• Specifications
• Buying Guide (Accessories, Replacement Parts)
• Experiments
• Documents (Knowledge Base, Safety Sheets)

TTechnical Suppor

echnical Supportt

Need more help? Our knowledgeable and friendly Technical Support
staff is ready to provide assistance with this or any other PASCO
product.

Phone

1-800-772-8700 (Option 4)
+1 916 462 8384

Online

pasco.com/support

W

Warr

arranty

anty, Cop

, Copyright, and T

yright, and Trrademarks

ademarks

Limited Warranty

Limited Warranty
For a description of the product warranty, see the Warranty and Returns page at
www.pasco.com/legal

www.pasco.com/legal.
Copyright

Copyright
This document is copyrighted with all rights reserved. Permission is granted to non-profit
educational institutions for reproduction of any part of this manual, providing the
reproductions are used only in their laboratories and classrooms, and are not sold for profit.
Reproduction under any other circumstances, without the written consent of PASCO
scientific, is prohibited.
Trademarks

Trademarks
PASCO and PASCO scientific are trademarks or registered trademarks of PASCO scientific, in
the United States and/or in other countries. All other brands, products, or service names are
or may be trademarks or service marks of, and are used to identify, products or services of,
their respective owners. For more information visit www.pasco.com/legal

www.pasco.com/legal.

Pr

Product End of Lif

oduct End of Life Disposal Instructions

e Disposal Instructions

This electronic product is subject to disposal and recycling regulations that vary by
country and region. It is your responsibility to recycle your electronic equipment per
your local environmental laws and regulations to ensure that it will be recycled in a
manner that protects human health and the environment. To find out where you can
drop off your waste equipment for recycling, please contact your local waste recycle
or disposal service, or the place where you purchased the product.

The European Union WEEE (Waste Electronic and Electrical Equipment) symbol and on the
product or its packaging indicates that this product must not be disposed of in a standard
waste container.

FCC Statement

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

CE Statement

CE Statement

This device has been tested and found to comply with the essential requirements and other
relevant provisions of the applicable EU Directives.

UV-VIS Spectrometer | SE-3607

Product Guide

4

012-16942A

Отзывы: