![background image](http://html.mh-extra.com/html/pasco/scienceworkshop-750/scienceworkshop-750_instruction-manual_761316006.webp)
®
Model No. CI-7599
750 Interface (USB)
5
General Operation Requirements and Setup
A. Operation Requirements and Precautions
a) The interface must be used with PASCO’s DataStudio software and
ScienceWorkshop
sensors. The interface will not work with PASPORT
sensors or other sensors, software, or interface (i.e. Xplorer, etc.)
Also, you can use only one 750 USB interface per computer.
b) A power supply and USB cable are required for operation. Always
plug the power supply into a standard three-pronged, grounded wall
outlet.
WARNING:
The interface is not water-proof. To avoid the risk
of shock, keep the interface, AC adapter, and cable away from water
and liquids. If conducting an experiment with liquids or water, place
the liquid container at least one foot away from the interface. For
maximum protection, keep liquids in closed containers with covers.
Also during operation, do not block the ventilating louvres on the top
of the interface box. The louvres help prevent the interface from
overheating during prolonged use.
B. Connecting the Interface to Your Computer
1.
Install DataStudio (version 1.7 or later) on your computer.
2.
Connect one end of the USB cable to the USB port on the back of
your computer.
3.
Connect the other end of the USB cable to the USB port on the back
of the interface.
4.
Connect the power supply to the jack on the back of your interface
box and to a grounded wall outlet.
5.
On the back of the interface, turn the power switch to the “1” (on
position). When the green power light illuminates, the power is
turned on.
To locate a USB port,
look for the USB symbol.
Note:
For more infor-
mation about opera-
tional requirements, see
Appendix C, ”Frequently
Asked Questions” in this
manaul
.