012-15856A
PS-3401
Instruction Manual
3
1-916-462-8384
800-772-8700
•
When using PTFE-coated magnetic bars, the following has to
be noted:
Chemical reactions of PTFE occur in contact with molten or
solute alkali metals and alkaline earth metals, as well as with
fine powders of metals in groups 2 and 3 of the periodic system
at temperatures above 300°C-400°C. Only elementary fluorine,
chlorotrifluoride and alkali metals attack it; halogenated
hydrocarbons have a reversible swelling effect.
•
The voltage stated on the type plate must correspond to the
mains voltage.
•
Don’t cover the machine, even partially e.g. with metallic plates
or film, which will result in overheating.
•
Ensure the heating plate is kept clean.
•
Protect the machine and accessories from bumps and impacts.
•
The minimum distance between the machines: the minimum
distance between the machine and the wall is 100 mm.
Inspection
•
Unpack the device carefully and check for any damages that
may have arisen during transit. Please contact the
manufacturer /supplier for technical support.
Note:
If there is any apparent damage to the device,
please do not connect the power line.
•
Contents of package
Items
Qty
Main unit
1
Power cable
1
Screwdriver
1
Magnetic stirring bar
1
User Manual
1
Stainless Steel Rod (about 25 cm)
1
Table 1
Control (Next page)