Matter Model
Model No. ME-9825
5
!
Introduction
The PASCO ME-9825 is comprised of many components which, when
assembled and reassembled in a variety of configurations, can be used
to model many demonstrations. Some suggested uses can be found in
the Activities section of this manual.
Equipment Setup
Assembling Atom Halves
1.
Position two atom halves as shown in Figure 1 and snap together.
Building A Cubic Atom Model
1.
Seat the single closed winding at either end of a spring inside a cleat
feature of an assembled cubic atom model. See Figure 2.
2.
Create desired cubic atom model by alternately assembling atom
models and springs.
Figure1: Snap together atom halves
Figure 2: Snap springs into cleats of atom model