![background image](http://html1.mh-extra.com/html/pasco/me-9447b/me-9447b_product-manual_3879078004.webp)
Assemble the Force Table
Figure 2. The Force Table completely assembled.
Install the Legs
1. Turn the Force Table upside down. Remove a leg from its storage clip and holder.
2. Line up the leg screw with a threaded hole in the underside of the Force Table.
3. Turn the leg clockwise until it is firmly attached to the table.
create
NOTE:
Do not tighten the legs more than finger tight so that they can be
removed later for storage.
4. Repeat for the other legs.
5. Turn the Force Table right side up.
Super Pulley Force Table | ME-9447B
4