background image

®

S tr e s s / St r a i n   A p p a r a t u s

I n tr o d u ct i o n

2

Introduction

The PASCO AP-8214 Stress/Strain Apparatus illustrates the relationship between 
stress and strain for various materials. The apparatus stretches a test coupon (and in 
some cases breaks it) while measuring the amount of stretch and force experienced by 
the test coupon. Software is used to generate a plot of stress versus strain. 

The Stress/Strain Apparatus requires a 

ScienceWorkshop

 or PASPORT interface, 

DataStudio software, a Rotary Motion Sensor (RMS), and a Force Sensor. Included 
with the apparatus are test coupons of various materials and thicknesses, a tee handle 
with socket for mounting the test coupons, and a bar for calibrating the apparatus.

This manual includes instructions for calibration and data collection using the 
DataStudio set-up files on the CD-ROM.

As an alternative to this manual, the CD-ROM also include a DataStudio workbook designed for 
use without the printed instructions. Open  Elasticity SW.ds (for ScienceWorkshop) or Elasticity 
PS.ds (for PASPORT) and follow the on-screen instructions.

Additional Equipment Required for Use with 

ScienceWorkshop

Sensors

Part Number

ScienceWorkshop Interface (500, 700, or 750)

CI-6400, CI-6450 or similar

DataStudio

1

1

DataStudio 1.8 or later recommended. Visit www.pasco.com to download the latest version. DataStudio Lite, the free version, is 

sufficient for use with the included experiment set-up files.

See PASCO catalog or www.pasco.com

Economy Force Sensor

CI-6746

Rotary Motion Sensor

CI-6538

Additional Equipment Required for Use with 
PASPORT Sensors

Part Number

PASPORT Interface

2

2

Apparatus requires a single multi-port interface such as Xplorer GLX (PS-2002) or PowerLink (PS-2001), or two single-port inter-

faces such as USB Link (PS-2100) or Xplorer (PS-2000).

See PASCO catalog or www.pasco.com

DataStudio

1

See PASCO catalog or www.pasco.com

Force Sensor

PS-2104

Rotary Motion Sensor

PS-2120

Содержание AP-8214









Отзывы: