- Pin 11: MOSI
- Pin 12: SSn
- Pin 13: INTRn
• Pin 14: Provides a co5 V DC at 1 A
• Pins 15-28: Ground
• Pin 29: Analog Input XA, inverting
• Pin 30: Analog Input XA, non-inverting
• Pin 31: Analog Input XB, inverting
• Pin 32: Analog Input XB, non-inverting
• Pin 33: Analog Input XC, inverting
• Pin 34: Analog Input XC, non-inverting
• Pin 35: Output port for Output 2 of the signal generator
• Pin 36: Return (ground) port for Output 2 of the signal
generator
• Pin 37: Output port for Output 3 of the signal generator
• Pin 38: Return (ground) port for Output 3 of the signal
generator
• Pin 39: Provides a co12 V DC at 150 mA
• Pin 40: Provides a constant -12 V DC at 150 mA
• Pins 41-42: Output port for Output 1 of the signal
generator
• Pins 43-44: Return (ground) port for Output 1 of the signal
generator
Software help
The PASCO Capstone Help provide additional information on
how to use this product with the software. You can access the
help within the software or online.
Software: Help > PASCO Capstone Help
Specifications and accessories
to view the
specifications and explore accessories. You can also download
support documents from the product page.
Technical support
Need more help? Our knowledgeable and friendly Technical
Support staff is ready to answer your questions or walk you
through any issues.
Chat
Phone
1-800-772-8700 x1004 (USA)
+1 916 462 8384 (outside USA)
Regulatory information
Limited warranty
For a description of the product warranty, see the Warranty and Returns page at
.
Copyright
This document is copyrighted with all rights reserved. Permission is granted to non-
profit educational institutions for reproduction of any part of this manual, providing
the reproductions are used only in their laboratories and classrooms, and are not
sold for profit. Reproduction under any other circumstances, without the written
consent of PASCO scientific, is prohibited.
Trademarks
PASCO and PASCO scientific are trademarks or registered trademarks of PASCO
scientific, in the United States and in other countries. All other brands, products, or
service names are or may be trademarks or service marks of, and are used to
identify, products or services of, their respective owners. For more information visit
.
Product end-of-life disposal
This electronic product is subject to disposal and recycling regulations
that vary by country and region. It is your responsibility to recycle your
electronic equipment per your local environmental laws and regulations
to ensure that it will be recycled in a manner that protects human health
and the environment. To find out where you can drop off your waste
equipment for recycling, please contact your local waste recycle or disposal
service, or the place where you purchased the product. The European Union
WEEE (Waste Electronic and Electrical Equipment) symbol on the product or its
packaging indicates that this product must not be disposed of in a standard waste
container.
CE statement
This device has been tested and found to comply with the essential requirements
and other relevant provisions of the applicable EU Directives.
FCC statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
850 Universal Interface | UI-5000
4
