OPERATING INSTRUCTIONS
Changing the angle of the head of the appliance
by unscrewing the knob. Tighten the knob
securely to set the tilt.
!! Do not change the angle of the head when the
knob is tightened. Risk of damage!
!! Never cover the appliance when it is hot!
Make sure the appliance is connected to the
proper power supply.
To switch on the appliance, push the button to I.
To switch off the appliance, push the button to 0.
Site your heater outside or in a large open area and well away from any obstructions such
as branches, or where the heater is near any objects that can be affected by heat, such as
furniture, curtain or other flammable objects. Minimum clearance is 1 meter.
Place the heater on a firm, level surface and plug it into a grounded 220-240V/50-60Hz power
outlet. Only operate the heater when it is in upright position and the base is attached. This
heater is equipped with a ON/OFF switch button.
TURNING THE PATIO HEATER ON AND OFF BY
REMOTE CONTROLLER
1. Insert the plug into a socket.
2. Please turn on the rocker switch on heater.
3. Please press ON/OFF on the remote controller
to use the heater. To adjust power, please press
HIGH, MED or LOW for desired heat.
4. To turn off the heater, press ON/OFF button
again on the remote controller. For a long
period of inactivity, please turn off the switch
on heater, and pull the plug off.
VOLCANO 2000 | MANUAL
