41
To remove a RAID volume:
1.
Select
2. Delete RAID Volume
[ ]
DISK / VOLUME INFORMATION
4. Recovery Volume Options
5. Acceleration Options
6. Exit
RAID Volumes :
ID Name
Level
Strip
Size Status
Bootable
0 Volume1
RAID1(Mirror) N/A
XXXGB Normal
Yes
Physical Devices :
Port Device Model Serial # Size Type/Status (Vol ID)
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Member Disk(0)
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Member Disk(0)
[ ↑↓] - Select [ESC] - Exit
[ENTER] - Select Menu
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
[ ]
MAIN MENU
2.
Press
Delete
key to remove the selected RAID volume.
[ ]
DELETE VOLUME MENU
Deleting a volume will reset the disks to non-RAID.
[ ↑↓] - Select
[ESC] - Previous Menu [DEL] - Delete Volume
WARNING :
ALL DISK DATA WILL BE DELETED.
(This does not apply to Recovery volumes)
Name
Level
Drives Capacity Status
Bootable
Volume0 RAID1(Mirror) 2 XXX.XGB Normal Yes
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Are you sure you want to delete “Volume0”? (Y / N) :
DELETE VOLUME VERIFICATION
[ ]
3.
Confirm the message and then press
Y
key.
4.
The status will display
Non-RAID Disk
.
Содержание SP-1060
