RP-700User’s Manual
Fig. 4.4-2 Schematic drawing of paper roll installation/replacement
Caution:
Adjust the paper guide according to the paper specification: install the paper guide at the
position of 57.5 for 57.5 wide paper roll; install the paper guide at the position of 80 for 80
wide paper roll; and remove the paper guide for 82.5 wide paper roll. Pay attention that the
winding direction of paper roll should meet printer requirements. Remove the end in
operation hole firstly when disassemble the paper guides, and install the end in operation
hole firstly when install the paper guides;
Ensure that the paper roll is tightly wound; otherwise paper jam or other failure may occur;
Paper roll should be placed stably in the paper cabinet without incline, or the printing will be
affected.
Fig.4.4-3 P osition of 57.5Fig. 4.4-4 Position of 80
Fig. 4.4-5 Operation hole
8
- 11 -
