Partner RP-330, Техническое руководство

Страница: 76 / 81

RP-330 Technical Manual
76
·If the printing area width set by GS L and GS W is less than the minimum
width, the printing area is extended to the minimum width only on the line
in question. The minimum width means 1 dot in normal (m=0,48) and
double-height (m=2,50), 2dots in double-width (m=1,49) and quadruple
(m=3,51) modes.
·Data outside the printing area is ready in and discarded on a dot-by-dot
basis.
·The position at which subsequent characters are to be printed for raster bit
image is specified by HT (Horizontal Tab) ESC $ (Set absolute print
position), ESC
＼
(Set relative print position), and GS L (Ste left margin).
If the position at which subsequent characters are to be printed is not a
multiple of 8, print speed may decline.
·The ESC a (Select justification) setting is also effective on raster bit image.
·When this command is received during macro definition, the printer ends
macro definition, and begins performing this command. The definition of
the command should be cleared.
·d indicates the bit-image data. Set time a bit to 1 prints a dot and setting
it to 0 does not print a dot.
GS w n
[Name]
Set bar code width
[Format]
ASCII GS w n
Hex 1D 77 n
Decimal 29 119 n
[Range]
2

n

6
[Description]
Set the horizontal size of the bar code.
n specifies the bar code width as follows:
n
Module width (mm) for Mult-
level Bar code
Binary-level Bar Code
Thin element width (mm) Thick element width (mm)
2 0.282 0.282 0.706
3 0.423 0.423 1.129
4 0.564 0.564 1.411
5 0.706 0.706 1.834
6 0.847 0.847 2.258
·Multi-level bar codes are as follows:
UPC-A, UPC-E, JAN13 (EAN13), JAN8 (EAN8), CODE93, CODE128
·Binary-level bar codes are as follows:
CODE39, ITF, CODABAR
[Default] n = 3
[Reference]
GS k