Partner 1750 Скачать руководство пользователя страница 6

ENGLISH

6

•  See to it that others keep their distance as long as the 

chain is in motion. Keep onlookers, children and animals 

away from the work area. Do not let inexperienced persons 

 handle the chainsaw or power cable.

•   Keep work area clear and well-lighted. Do not operate chain 

saw under wet or humid conditions, around water or in rain 

or snow. Ingress of moisture into the motor can cause short-

circuiting.

•   Show caution, care and common sense. Do not operate 

the chain saw when you are tired or under the infl uence 

of  alcohol or drugs which may affect vision, judgement or 

physical control. Keep all body parts well away from the 

chain as long as the motor is running. Always ensure that 

the chain is not touching anything before starting the chain 

saw.

•   Be on your guard against electric shock. Avoid touching 

metal objects imbedded in or in electrical contact with the 

ground.

•   Do not abuse power cables. Never lift or carry the chain 

saw by the power cable, and never disconnect the power 

by jerking on the cable. Keep cable away from water, oil 

and sharp objects. Avoid crushing cable in or against 

doors, fences, or other metal objects which can conduct 

 electricity.

•   Inspect the chain saw and power cable before use. Do not 

use a chain saw with a damaged cable. Get it repaired by 

qualifi ed service personnel. Keep handles clean, dry and 

free of grease and oil.

•   See to it that all tools are removed from the chain saw 

 before connecting the power.

•   Ensure that the extension cord is in good condition and 

 approved for outdoor use. It must be of suffi cient  dimension 

for the chain saw’s rated power. See section «IMPORTANT! 

READ BEFORE USING CHAIN SAW» on page 1.

•   When carrying the chain saw, stop the motor, keep your 

 fi nger AWAY from the power trigger and turn the saw with 

the guide bar to the rear and pointing away from your 

body.

•   Connect chain saw to a power supply equipped with a 

 current-operated earth-fault protection device.

•  

Double-insulated!

 Your electric chain saw is double-

 insulated for added protection against electric shock. A 

double-insulated electric tool is designed with two  separate 

«layers» of electrical insulation or one layer of insulation 

of double thickness between the operator and the tool’s 

 conducting parts. Double-insulated tools do not use earthed 

mains connections and may therefore be connected to any 

 normal 220-240 VAC outlet. Observe the same  precautions 

 required with all electric tools. Double insulation gives 

 added protection only against defective insulation.

•   Use chain saw only on wood. Do not attempt to cut metal,  plastic, 

masonry or any non-wood building materials. Do not use the 

guide bar to push away branches, roots or other objects.

•   Ensure that you can move and stand safely at all times. 

Watch out for roots, stones, branches, holes, mounds 

and so forth when moving around. Be par  ticularly careful 

when working on slopes. Work with the trunk to your right, 

 keeping the log between you and the guide bar. Always grip 

your chain saw with both hands, holding it as close to your 

body as possible for best control. Wherever possible, let 

the log take the weight of the chain saw. A lways keep the 

log between you and the guide bar when moving forward.

•  Do not bear down hard when cutting. With the chain 

 properly sharpened, light pressure is suffi cient. Forcing the 

saw at the end of a cut can make you lose control when you 

break through.

•   Secure short logs  before sawing.

•   Show particular care when cutting small branches, and 

avoid sawing bushes or many small branches at once. 

Small branches can get caught in the chain with a violent 

jerk and cause  serious personal injury.

•   We recommend limiting tree diameter to guide bar length so 

that the NOTCH and FELLING CUT may be done with  single 

cuts. (See «Technical Specifi cations» for  

recommended 

guide bar lengths for your chain saw model).

•   The chain will keep rotating a short while after releaseing 

the power trigger (slowness).

•   Disconnect power supply before servicing chain saw.

•   Your chain saw complies with all relevant safety stan dards. 

Repairs should be performed only by qualifi ed  service 

 personnel using only original parts.

•   Examine saw closely for damaged parts before use to avoid 

malfunctions and to ensure safe and effi cient  operation. 

Verify that all moving parts are fi tted and adjusted correctly. 

Except for the maintenance described in this operator’s 

manual, damaged parts must be replaced at an authorized 

service centre. Defective power triggers are to be replaced 

by authorized service personnel. Do not operate the saw if 

the power trigger does not work properly.

•   Store the chain saw in a safe, dry place out of the reach of 

children, with the power disconnected and the guide bar 

scabbard in place.

Содержание 1750

















Отзывы: