
ENGLISH
3
Symbols 2
Important! Read before using chain saw
2
Contents 3
EC declaration of conformity
3
Technical speci
fi
cations
4
Chain saw parts
5
Safe use
5
Starting and stopping
7
Daily inspection and maintenance
7
Kickback prevention
8
Chain brake with kickback guard
9
- Kickback guard inspection
9
- Manual chain brake function check
9
- Inertia chain brake function check
9
Mounting guide bar and adjusting chain
10
Chain catcher
11
Right hand guard
11
CONTENTS
Slip clutch
11
Electronic overload protection 1950W
11
Cutting equipment
11
Chain and guide bar lubrication
12
-
Chain
oil
12
- Filling chain oil
12
- Checking automatic
12
chain lubrication system
- Checking chain wear
12
Filing chain
13
Limbing
13
Crosscutting
14
Felling operations
14
- Danger zone
15
- Felling direction
15
- Clearing branches/Line of retreat
15
- Felling
15
Husqvarna Norge AS
, N-1708 Sarpsborg, Norway hereby declares that the following chain saws:
Partner 1750 and Partner 1950, with serial numbers starting at 54000001 and onwards,
- are manufactured in compliance with EC Directive 98/37/EC (Machinery), EC Directive 73/23/EEC including amendments
(Low Voltage Directive), EC Directive 89/336/EEC including amendments (Electromagnetic Compatibility Directive), and in
accordance with annex V of Directive 2000/14/EC (Noise Emission in the environment by equipment for use outdoors)
- are manufactured in compliance with the following harmonized standards: EN 50144-1, EN 50144-2-13, IEC 60745-1
and IEC 60745-2-13.
Notifi ed body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has:
- carried out the EC type examination in accordance with the machinery Directive (98/37/EC) Article 8(2)(c)
- issued EC type examination certifi cates
No. 404/04/1038 - Partner 1750 and 404/04/1037 - Partner 1950
pursuant to
machinery Directive 98/37/EC, Annex IV (4)
The chain saw submitted is identical to the samples submitted for EC type examination.
The measured and guaranteed sound power levels in accordance with Directive 2000/14/EC are set forth under Technical Data
in the User’s Manual.
Sarpsborg, 1th of October 2005
--------------------
Jan Hansen, President
EC DECLARATION OF CONFORMITY