Parsun T2CBMS, Руководство пользователя

Страница: 31 / 47

24
3.4 Inspecting idling speed
A diagnostic tachometer should be used for this procedure. Results may vary depending on whether testing is
conducted with the flushing attachment in a test tank, or with the outboard motor in the water.
1. Start the engine and allow it to warm up fully in neutral until it is running smoothly.
2. Verify whether the idle speed is set to specification.
Idle speed
：
1150±50Rpm
CAUTION:
Correct idling speed inspection is only possible if the engine is fully warmed up. If not warmed up
fully, the idle speed will measure higher than normal. If you have difficulty verifying the idle speed,
or the idle speed requires adjustment, consult a PARSUN dealer or other qualified mechanic.
3.5 Checking wiring and connectors
Check that each grounding wire is properly secured and each connector is engaged securely.
3.6 Checking for leakage
Check that no exhaust or water leaks from the joints between the exhaust cover, cylinder head, and body
cylinder.
Check for oil leaks on the around the engine.
CAUTION:
If any leaks are found, consult your PARSUN dealer.