Golden Retriever Installation Instructions
Page 9 of 19
Step 2: Connect the power supply to the router.
A.
For Golden Retriever A & L,
connect the router power supply to the power supply port on the
router, shown in Figure 6, and plug it into the NEMA male to female adapter, provided in the kit.
Plug the NEMA male to female adapter into the AC power port on the case.
B.
For Golden Retriever G,
connect the power to barrel adapter to the router power supply port and
to the USB-C to barrel adapter. Connect the USB-C to barrel adapter to the 45W-Out Type-C port
on the battery pack, as shown in Figure 8.
Step 3: Connect the fan to the router (Golden Retriever G only).
A.
This step only applies to the Golden Retriever G.
B.
Plug the USB-A cord from the fan into the USB-A port on the router, shown in Figure 6.
Step 4: Connect the router to the RJ-45 ports on the case using ethernet cords (Golden Retriever G &
L only).
A.
This step only applies to the Golden Retriever G and L.
B.
Connect the provided ethernet cords to the LAN port and WAN port on the router, shown in Figure 6.
C.
Connect the other ends of the ethernet cords from the router to the RJ-45 ports on the case. Keep
track of which cord is connected to the WAN port on the router. Consider connecting the WAN port
on the router to the front RJ-45 port and the LAN port on the router to the back RJ-45 port, as
shown in Figure 7.
Figure 7: Connect the router to the RJ-45 ports on the case using ethernet cords.
WAN
LAN
