Golden Retriever Installation Instructions
Page 5 of 19
Step 2: Mount the router to the bottom plate.
A.
If not already done, remove the cover plate from the enclosure.
B.
For Golden Retriever A & L,
install the antenna cable labeled LTE 1 (or PLTE 1 in some cases) to the
router port labeled MAIN (see Figure 6 on Page 7). This is because the MAIN port on the router is
difficult to access once the router is installed on the bottom plate.
C.
Align the router with the holes on the bottom plate.
Ensure the router orientation is correct, as
shown in the image below.
D.
Mount the router using the four PTA0399-TL pan head screws provided in the kit, as shown in
Figure 3.
E.
Guide the cable bundles back through the holes in the cover plate.
Figure 3: Fasten the router to the bottom plate using PTA0399-TL screws.
