User’s guide
20
20
PAIR DEVICE AND FIRST USE
PAIR DEVICE AND FIRST USE
During the initial charging, it is necessary to pair your telephone with the hands-free kit.
Activate bluetooth on your mobile
Search for peripheral devices:
For more information, refer to the booklet on your
telephone / Pairing section.
Or visit www.say-parrot.com
Home / Support / Download
Once it is detected, "Parrot CK3100" is displayed
on your telephone
Enter the link code
1234
and validate.
"Pairing underway" is displayed on the CK3100
"Pairing complete" is displayed on the screen, once pairing is successful.
The CK3100 then connects to your telephone.
Once it is connected, the bluetooth logo is displayed on the screen
(except for telephones fitted with the Headset profile).
With certain telephones, the name of your mobile,
the battery level and the network are displayed on the screen.
The menus are accessible from then on and the hands-free kit announces their name.
From then you are connected to the hands-free kit and can use it for communica-
ting.
Call: Access your telephone phonebook.
Receive a call: Press the green button of the hands-free kit to pick up.
Hang up: Press the red button of the CK3100.
WARNING
Some telephones use Bluetooth in a
particular manner. Verify in the
"Preferences" / "Advanced Pref. " / "Pair
Telephone" menu if the model of your tele-
phone is listed there. Then select the option
in the menu.
SAP
If you want to utilise the Sim Access Profile
service on your telephone, please refer to
the GSM section of the booklet
En
En
19
19
Installation of the microphone and the console
Microphone :
The microphone must be aimed at the driver
and can be installed:
Between the sun visor and the rear vision mirror.
On the LCD screen.
LCD screen :
Several accessories allow the screen to be installed in multiples
sites in the body of the vehicle.
There are four options:
Anywhere in the vehicle
Use the double-sided scotch tape provided. It needs to be
applied to a clean flat surface anywhere in the vehicle.
On the air fan mounting
Use the gripper it is supplied with. Only some vehicle models
are not adapted to this type of support.
On the dashboard or the ceiling light fitting
Fix the metal square on the base.
Then apply the small patch of double-sided scotch tape to
the foot to stick it onto the wall.
On the in-car radio
The metal square is to be inserted into the two holes in the front
panel (only on certain models) of the in-car radio.
CK3100 Advanced Car Kit
Note
:
The screws 12mm
must be used only
with this support
