Parrot CK 3000 Evolution, Руководство пользователя, Страница: 9 / 106

ENGLISH
9
PAIRING WITH SONY ERICSSON T606,T608, T610, T616, T618,T630, Z600
AND Z608
When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your
Parrot CK3000. Once this is done, connection between your telephone and your hands-free kit will take place automatically
as soon as the two devices are less than a few meters apart. A 'beep' will be heard, indicating that connection is
established.
Procedure :
IMPORTANT: Check that the lights on the red and green buttons come on and off according to the position of the ignition
key. With these phones, it is necessary to deactivate the infrared link (IrDA) for the CK3000 to work. Proceed according to
the following steps”
Connections, Activation IR, select “Deactivate” and validate by clicking on “ Selection”.
Your phone is on. Turn on the ignition key. Proceed with the following sequence to do the pairing
•
Select “ Connections”, then “Bluetooth®”.
•
The pairing is done through “HandsFree” or “My Peripherals”
•
Select “Handsfree”, validate by clicking on “Selection”
•
“Add a handsfree device?” is indicated on the display, validate with “Yes”
•
or alternatively, Select “My Peripherals”, validate by clicking on “Selection”
•
New Peripheral, click on “Add”
•
“Check if the Handsfree is in the correct mode and if you have the passkey”, OK
•
“Searching for handsfree devices” is displayed, just wait.
•
The phone looks for all devices equipped with a handsfree profile.
•
Then, “ Parrot CK v…” is displayed, validate by clicking on selection
•
Enter 1234 as passkey, click OK.
•
The pairing phase comes to an end and “Parrot CK V…added to my peripherals” is displayed.
Using Phone-specific Features
To synchronize your phonebook to your CK3000, follow the steps hereafter:
Connections, Accessories, Parrot Menu.
For detailed instructions, consult the user’s guide of the phone.
LEARNING NAMES
In order to assign voice tags to the names in your phonebook, go into your phone menu and follow the instructions below in
order to go to the “Parrot Menu”. Enter the menu and select “Phone book”. You will see the list of your phone book entries.
To create a voice tag, highlight the desired name and press “Yes”. You’ll hear vocal prompt saying “Click on “Yes” and say
the name displayed”. Repeat the procedure as prompted. The voice tagged numbers will be preceded by an asterisk (*).
WARNING!
Correct recording of the voice tags is very important. The reliability of the voice dialing system depends of the standard of
the recording. To obtain optimum operation, please, comply with these recommendations:
Speak out clearly and naturally.
Make the recording in quiet place.
Turn off your engine, radio and ventilation.
Close the doors and windows.
Example:
Go to Main Menu, Phonebook, List and click on Yes and choose the name you’d like to add as a voice tag.
You will hear a prompt: “Click on Yes, and say the name displayed”.
Press “Yes” and say: “Nicolas”. The system repeats: “Click on Yes, and repeat “Nicolas”.
You press “Yes” again and repeat: ”Nicolas”.
ERICSSON & SONY ERICSSON