Installation & Operating Instructions for the
F
62
27
Parrotuncle Owner’s Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
Parrotuncle Lighting, 218 Black Tie Lane, Chapel Hill, NC
www.parrotuncle.com
Parrot Uncle YOU CAN BE SURE OF are trademarks of Eileen Grays LLC.
Used under license by Eileen Grays LLC.
All rights reserved.
Made in
CHINA
Fig. 7-1
Attach the
to the GROUND wire in the junction box.
The GROUND wire is usually a bare copper
wire without plastic insulation. It could also be
covered in green plastic insulation.
Attach the BLACK wire and BLUE wire from
the ceiling fan to the BLACK wire in the junc-
tion box.
wire from the ceiling fan to
the WHITE wire in the junction box.
To operate your ceiling fan with the pull chain(s)
and switches mounted on your fan, follow the
instruction below
(see figure 7-1)
Each of the above connections
should be made as tight as pos-
sible using the proper size plas-
tic wire nuts. Plastic electrical
tape is not recommended for
these connections.
Step 3 Making the electrical connections
GREEN wire
(connected to the half
ball)
Attach the WHITE
Fold the connected wire
(see figure 7-2)
and push
them up inside the electrical junction box with
the BLACK and BLUE wires to one side and the
WHITE and GREEN to the other side. Make
sure the wire nuts do not come loose during this
operation.
Fig. 7-2
Green
White
Black
Blue
Green
White
Black
Blue
