Parrot Uncle BBLDA158A, Инструкция по установке и эксплуатации

Страница: 2 / 41

TECHNICAL INFORMATION
SKU
120Vac 25W 18W
Nominal Voltage
Nominal output(motor) light
Safety Information
WARNING:
TO reduce the risk of personal injury,
do not bend the blade brackets (also referred to as
flanges) during assembly or after installation. Do not
insert objects in the path of the blades.
WARNING:
Remove the rubber motor stops on
the bottom of the fan before installing the blades
or testing the motor.
WARNING:
To reduce the risk or fire or electric
shock, do not use this fan with any solid-state
speed control device.
WARNING:
To avoid possible electric shock,
turn the electricity off at the main fuse box before
wiring. lf you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed
electrician.
WARNING:
Electrical diagrams are for reference
only. Optional use of any light kit shall be UL-listed
and marked suitable for use with this fan.
WARNING:
To reduce the risk of fire, electric
shock, or personal injury, mount to outlet box
marked”Acceptable for fan support of 35lbs.
(15.9 kg) or less "and use the screws provided
with the outlet box.
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
BBLDA158A
Installation & Operating Instructions for the
Parrot Uncle Owner's Installation, Manual
BBLDA158A
1. To reduce the risk of electric shock, the electricity has been
turned off at the circuit breaker or fuse box before begin.
2. All wiring must be in accordance with the National Electrical
Code NASI/NFPA70-1999 and local electrical codes.
Electrical installation should be performed by a qualified
licensed electrician.
3. The outlet box and support structure must be securely
mounted and capable of reliably supporting 35lb.(15.9kg).
Use only UL listed outlet boxes marked “Acceptable for Fan
Support of 35lbs (15.9kg) or less.”
4. The fan must be mounted with a minimum of 7 ft. (2.1m)
clearance from the trailing edge of the blades to the floor.
5. Do not operate the reversing switch while the fan blades are
in motion. You must turn the fan off and stop the blades
before you reverse the blade direction.
6. Do not place objects in the path of the blades.
7. To avoid personal injury or damage to the fan and other
items, please be careful when working around or cleaning
the fan.
8. Electrical diagrams are for reference only. Light kits that are
not packed with the fan must be UL-listed and marked
suitable for use with the model fan you are installing.
Switches must be UL General Use Switches.
Refer to the instructions packaged with the light kits and
switches for proper assembly.
9. After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into the
outlet box. The wires should be spread apart with the
grounded conductor and the equipment-grounding conductor
on one side of the outlet box. and the ungrounded conductor
on the other side of the outlet box.
10. All setscrews must be checked and retightened where
necessary before installation.