103
103
103
103
/
105
105
105
105
The Base-unit is in
standby
mode,
“Power-LED” is flashing at Base
unit.
Power-supply is missed.
Power off and on again or
insert a dongle into laptop.
When using window 7 the
following message about the
Window Aero color scheme
appears “Windows has detected
your computer’s performance is
slow. This could because these are
not enough resources to run the
windows Aero color scheme. To
improve… ”
MTC-4500 uses resource from the
GPU. In combination with other
programs which do so, Window 7
sometimes shows this message
suggesting to disable Aero to
improve the performance of lap-
top.
It’s safe to ignore this
message and choose “Keep
the current color scheme.”
Your content is removed from the
display and the LEDs on the button
are blinking
Connection to the Base Unit is lost. MTC-4500 tries to restore the
connection automatically. If it fails,
the LEDs on the button start
blinking red.
Unplug the button from your lap-
top and try a new button.
Nothing is shown on the displays
at all
The displays are switched off.
Switch on the display
The display cable is not correctly
connected
Insect the display cable to the
display and the Base Unit
The Base Unit is in standby mode
Briefly push the standby button on
the Base Unit or power off and on
again the Base Unit.
No LAN connection with the Base
Unit
Wrong IP address
IP address is not within LAN range
DHCP is not enabled.
No WiFi connection between
mobile device with Base Unit
Wrong WiFi frequency
Check mobile device to select the
correct 2.4GHz or 5GHz
Wrong SSID and password
Enter the correct SSID
No audio when transmit local file
to Base Unit
Unsupportive audio format,
including Dolby MS11, DDCO
DTSLBR, DTSE, DTSNeoUltra, SRS-
THEATERSOUND,
DTS_StudioSound3D, DTS_HD,
If possible, reformat it to the other
audio format, like DD, DD+, HE-
AAC, DTS DMP, WMA, DRA, COOK
There is no sound at main-display.
No connected audio device.
Make sure, the audio is turned on.
Volume is set to OFF.
Adjust level in menu configuration
MTC-4500 console in on webserver
settings.
The volume level is set too low in
the options of the "MTC-4500"
Launcher program on PC.
Adjust the volume in the "MTC-
4500" Launcher program on PC.
Содержание MTC-4500
