1. 4R output port
2. 1 AUX input , Independent control
3. Short-circuit,clipping and high-temp protection
4. Bass, Treble volume control
5. 24V phantom power
6. 1 line balance output
7. 1 recording output
8. 3 MIC input
，
Independent control. MIC 1 capacitive microphone,
MIC 2 handheld microphone, MIC 3 for wireless microphone .
[ L E C T E R N A M P L I F I E R U S E M A N U A L ]
1 FEATURES
2 PRODUCT STRUCTURE INSTRUCTION
3 RECEIVER FEATURES
1. Power on indicator: glows green when the receiver is powered on.
2. RF signal indicator:glows yellow when therefore signals are received.
3. Transmitter audio peak indicator:flashes red when the audio signal.
4. Volume control:adjusts the output volume of the receiver.
5. Telescoping antenna:receives signals from the transmitter.
6. Audio output:output the audio signals for connection to amplifiers.
7. Metal:receiver metal shell.
8. Power input:accepts power from supplied AC adapter.
Note:
1 The MIC2 on the platform will be automatically cut off when the MIC2 on the column be input.
2.When the MIC 2 on the column is disconnect, the MIC2 can be input and the volume can be
controlled by the MIC.
1. Goose neck MIC 1
2.
3. Panel
4. Wireless MIC receiver
5. MIC1 volume control
6. MIC2 volume control
7. Wireless-MIC 3 control
8. Treble control
9. Bass control
10. AUX 1 volume control
Lamp indicator
11. Power indicator
12. AUX 1 input
13. Recording output.
14. Pre-Amp output
15. MIC 2 input
16. Power switch
17. Power input
18. Selection switch of speaker output.
19. Speaker left channel
20. Speaker right Channel
21. Bottom
1
2
3
4
21
5
6
7
16
10
11
15
12
14
17
18
19
20
8
9
13
BASS
AUX 1
WIRELESS-MIC 3
MIC 2
PRE-OUT
AUX 1 REC OUT
MIC 1
0
10
1 GND
2 HOT
3 COLD
TREBLE
MIC 2
0
-5
+5
0
10
0
-5
+5
0
10
0
10
PL
BASS
AUX 1
WIRELESS-MIC 3
MIC 2
PRE-OUT
AUX 1 REC OUT
MIC 1
0
10
1 GND
2 HOT
3 COLD
TREBLE
MIC 2
0
-5
+5
0
10
0
-5
+5
0
10
0
10
PL
5
