14
Control panel functions
To access the heat level display
, press on one of the two flame icons to adjust the heat level settings. Press the
green icon identify 5 - (minus) or 6 + (plus) to decrease or increase the desired heat level.
Note:
Level 1 is regulated with a flow of approximately 1 lb. or .45 kg of fuel per hour and level 5 is regulated with
a flow of approximately 4 lbs or 1.81 kg of fuel per hour. The feed system is on when the light identified D is on.
To access ash removal settings:
press on one of the two trash icon to adjust the quantity of ash removed.
Press the green icon identified by 3 - (minus) or 4 + (plus) to decrease or increase the fuel bed height in the
burner. For more details, refer to page 19.
Note:
Each type of pellet or agriculture fuel produces its own quantity of ash content per hour. Setting 15 is set by
default; setting 10 to 20 are available for adjustments. The ash system is on when the light identified C is on.
Ash extraction adjustment
Heat level adjustment
Wood pellet combustible
Use the green icon identified by number 7 to start the unit with the Wood pellets software only.
Corn combustible
Use the green icon identified by number 8 to start the unit with the Corn software only.
Wheat combustible
Use the green icon identified by number 9 to start the unit with the Wheat software only.
Stop
Icon 10 : Is used to stop the unit. Display B will show C1, the feed system will stop and the cleaning mode will
be activated immediately to evacuate the ashes accumulated in the burn-pot. The C2 mode controls the cooling
mode and will automatically close the fans when the stove is cold enough.
