SAFETY INFORMATION
Other instructions
• This appliance is designed for domestic use. It must not be used for purposes other
than those for which it was designed for.
• Only wash fabrics that are designed to be machine dried. Follow the instructions on
each garment label.
• Any electrical work required to install this appliance should be carried out by a
qualified electrician.
• If the machine is situated on a carpet floor, please adjust the feet in order to allow
air to circulate freely under the appliance.
• Do not climb onto the dryer, rest heavy objects/heavy devices, or items with water
or liquid leakage on the dryer to avoid deformation of the face panel and of plastic
components.
• Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp
materials can cause extensive damage and must not be placed into the machine.
• After installing the appliance, check that it is not pressing or standing on its electrical
supply cable or vent hose.
• Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber
backed articles, and clothes or pillows fitted with foam rubber pads should not be
dried in the tumble dryer.
• Always unplug the appliance after use, clean, and maintenance.
• Do not overload the appliance. See the relevant section in the user manual.
• Clothes that are dripping wet should not be placed in the dryer.
• Garments which have been in contact with volatile petroleum products should not
be machine dried. If volatile cleaning fluids are used, care should be taken to ensure
that the fluid is removed from the garment before placing it in the machine.
• Never use the tumble dryer if the power supply cable, the control panel, the working
surface, or the base is damaged so that the inside of the tumble dryer is accessible.
• The tumble dryer is not to be used if industrial chemicals have been used for
cleaning.
• The lint must not be allowed to accumulate around the tumble dryer.
• Do not dry unwashed items in the tumble dryer.
• Fabric softeners or similar products should be used as specified by the fabric softener
instructions.
• The final part of a tumble dryer cycle occurs without heat (cool down cycle) to
ensure that the items are left at a temperature that ensures the items will not be
damaged.
Before Use
3
