Compartment A:
With each wash cycle.
Compartment B:
For programs with pre-wash only.
(Follow the user instructions!)
Mechanical indicator C:
Electric indicator on control panel.
Check the rinse aid level
Load the baskets
Select a program
Close the door, turn on the water tap and press the Start/Pause button. The machine will start working
after about 10 seconds.
Starting a program
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait about 15 minutes before unloading the dishwasher to avoid handling the dishes and
utensils while they are still hot and more susceptible to breakage. They will also dry better. Unload the
appliance, starting from the lower basket.
Changing the program
Add forgotten dishes in the
dishwasher
Scrape off any large amounts of leftover food. Soften remnants of burnt food in pans, then load the
baskets. Refer to the dishwasher loading instructions.
Press the Program button until the selected program lights up (see “Operating Instructions”
section).
When the working cycle has finished, the buzzer of the dishwasher will sound 8 times, then stop.
Turn off the appliance using the Power button.
If the appliance is switched
off during a wash cycle
Open the door carefully.
Hot steam may escape
when the door is opened.
WARNING!
If the appliance is switched off during a wash cycle: when switched
on again, re-select the washing cycle and operate the dishwasher
according to the original Power-on state.
Switch on the appliance
Press the Power switch button to switch on the appliance. Open the door.
1. Open the door a little to stop the dishwasher.
2. After the spray arms stop working, you can open the door completely.
3. Add the forgotten dishes.
4. Close the door, the dishwasher will start running again after 10 seconds.
Quick operation guide
1. A running cycle can only be modified if it has only been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2. Press the Start/Pause button, then press the program button for more than 3 seconds to cancel the
running program.
3. Select a new program.
4. Restart the dishwasher.
C
A
B
For detailed operating
read the corresponding content in the instruction manual.
instructions,
Select a program
