background image

Parmco Appliances 

extended 5 year  

warranty

The Warranty:

•  Subject to the terms and conditions contained within this 

warranty, if the product is not of Acceptable Quality (as 
defined in the Consumer Guarantees Act) within 5 years of 
the date of original purchase, then Parmco Sales undertakes 
to repair or, at it’s sole discretion, replace the product.

•  The warranty does not cover the costs of transport, mileage 

or travelling time if the product is located beyond 30km of a 
recognised Service Agent.

•  This warranty is offered as an extra benefit, and does 

not affect other legal rights, which can not be modified or 
excluded by agreement.

•  This warranty only applies to goods supplied and installed in 

the North and South Islands of New Zealand.

•  The provisions of this warranty are in addition to the rights 

and remedies available to consumers under the Consumer 
Guarantees Act 1993.

The Warranty is not valid:

•  If the product is not installed and operated in accordance with the operating 

instructions.

•  If the product is not installed to comply with the electrical, gas, plumbing 

and other Regulations and Codes of Practice in New Zealand.

•  If the product is operated on voltages or frequencies outside the normal 

range for domestic appliances in New Zealand.

•  If the product is not used in normal domestic use, or if it is used in a 

business as defined in the Consumer Guarantees Act.

•  If any serial number has been removed or defaced.
•  If proof of date of purchase is not supplied, except at the sole discretion of 

Parmco Sales.  Proof of purchase can be for the product itself, or if installed 
with a kitchen or house then proof of purchase can be from a Parmco 
reseller of products supplied by Parmco. 

Liability under this warranty will not be accepted for:

•  Wear and tear from normal domestic use.
•  Damage in transport.
•  Damage caused to the product by neglect, abuse, negligence, wilful act or 

misuse.

•  Any defect caused by accident, misuse, neglect, tampering with or 

unauthorised modifications of the appliance or any attempt at internal 
adjustment or repair by any person other than an Authorised Service Agent.

•  Service calls that relate principally to the following:
•  Instruction on how to use the product.
•  Repair or replacement of house fuses, electrical wiring, gas fitting or 

plumbing.

•  Wear and tear caused by normal use of the product.
•  Normal or scheduled maintenance including blocked filters or ducting.
•  Consumable items such as light bulbs.
•  Any damage to ceramic glass hobs caused by spills when cooking.
•  Any breakage or damage of glass items.
•  Any damage caused by non recommended product used for cleaning, 

maintaining, lubricating or similar.

•  Any aspect relating to the installation of the product, or damage caused 

during installation.

•  Any third party (including reseller) or consequential loss or damage (direct 

or indirect) however arising.

Product

Date of purchase

Dealer / Retailers Name

Please retain this Warranty card together with receipt or other proof of 

purchase date when seeking service during the warranty period

Please contact Parmco at 09 573 5678 if your 

appliance needs servicing under warranty. Please 

have your model number and proof of purchase ready. 

Warranty repairs must be authorized by Parmco.

p: 09 573 5678 

f: 09 573 5699 

e: [email protected] 

w: www.parmco.co.nz

Содержание In-bench 600mm



























Отзывы: