Parmco HX-1-6S-4E, Инструкция по установке и эксплуатации

Страница: 7 / 12

4
Using your Hob
Opera ti on of the electric plates
The electric plates can be standard or rapid type. The rapid type plates are dis ti nguished by a red mark at the centre. According
to your needs, the heat of the plates can be adjusted by turning the knobs either clockwise or an ti -clockwise, to any of the 6
positons besides “0” (OFF).
•
Rapid type elements (marked by a red dot)
o
This hob has one rapid heat element that is of a higher w att age, thermosta ti cally controlled.
o
This element is designed speci fi cally to rapidly heat food/liquid before transferring to other elements or for use with
cooking applica ti ons that require short term high heat.
o Once the selected hea ti ng level is reached, the element will cycle to maintain the hea ti ng level.
o For cooking applica ti ons that require prolonged cooking/boiling/simmering, please use the other elements.
To start cooking:
Place a suitable pan on the cooking zone you want to use.
Adjust the power se
tti ng using the control knob of the corresponding cooking area to the desired hea ti ng level.
(1 indicates the lowest heat se tti ng and 6 is the highest heat se tti ng)
When you have
fi nished cooking, turn the control knob to the "0" posi ti on to turn o ff the cooktop.
The posi
ti ons marked by numbers correspond to the maximum output of heat.
The power indicator light shows that the electric plates are switched on.
Advice on the use of cooking tops
o
To save energy and to extend the life of the electric cooktop, we advise using pans with fl at bo tt om and with a diameter
not lesser than the diameter of the hea ti ng plates. Make sure the base of your pan is smooth and sits fl at against the
surface.
o
Always centre your pan on the cooking zone.
o
Always li ft t he pots o ff the electric cooktop to prevent scratching the surface.
o
Care must be taken that fl uids do not spill on the electric plates.
o
Never leave the elements on without pans on them or with empty pans, and never use the tops to heat the room.
Switch on the plates a
ft er having set the pans on them.
o Switch o ff the hea ti ng element before removing the pans.
o Once switched o ff , the plates remain warm for a while.
Cleaning and Maintenance
0
1
2
3
4
5
6
0
1
2
3
4
5
6