6
Installa
ti
on
Electrical connec
ti
on
Appliances with three-pole cable are set up for opera
ti
on with alterna
ti
ng current at
the voltage and frequency indicated on the ra
ti
ng plate. Look at the connec
ti
on
wiring diagram. The earth conductor is yellow/green.
The connec
ti
on to the electricity supply must be made by a quali
fi
ed person and
following the regula
ti
ons in force.
When the appliance is to be installed above a built-in oven, the two appliances must
be connected separately, to make it easier to take the appliances out and for
electrical safety. The supply cable must be posi
ti
oned so that no point can reach a
temperature of 50°C higher than the ambient temperature. Check that the supply
system has an e
ff
ec
ti
ve earth connec
ti
on and corresponds to the standards in force.
Also ensure and that the plug can be reached easily when the appliance is installed.
The manufacturer refuses all responsibility if the standards in force are not adhered
to.
TECHNICAL INFORMATION FOR INSTALLATION PERSONNEL
This appliance must only be installed only an authorised personnel and in
accordance with the regula
ti
ons in force. The wall and bench surfaces must be
capable of sustaining temperatures of 75°C. All laminates,
fi
xing adhesive and
surfacing materials should be cer
ti
fi
ed suitable for this temperature.
Refer to the illustra
ti
ons below for required clearances around appliance and for
the cutout in the bench top.
650
650
