21
Pans do not become
hot and appear in
the display.
The induction hob cannot
detect the pan because it is
not suitable for induction
cooking.
The induction hob cannot
detect the pan because it is
too small for the cooking
zone or not properly
centered on it.
Use cookware suitable for
induction cooking. See section
‘Choosing the right cookware’.
Centre the pan and make sure
that its base matches the size of
the cooking zone.
The induction hob
or a cooking zone
has turned itself off
unexpectedly, a
tone sounds and an
error code is
displayed (typically
alternating with one
or two digits in the
cooking timer
display).
Technical fault.
Please note down the error
letters and numbers, switch
the power to the induction hob
off at the wall, and contact a
qualified technician.
Failure Display and Inspection
If an abnormality comes up, the induction hob will enter the protective state
automatically and display corresponding protective codes:
Problem
Possible causes
What to do
F1-F6
Temperature sensor failure
Please contact Parmco.
F9-FA
Temperature sensor of the IGBT
failure.
Please contact Parmco.
FC
The connection between the
display board and the main board
is fail
Please contact Parmco.
E1/E2
Abnormal supply voltage.
Please inspect whether power
supply is normal. Power on after
the power supply is normal.
E3/E4
Temperature sensor of the
ceramic glass plate is high
Please restart after the induction
hob cools down.
E5
Temperature sensor of the IGBT
is high
Please restart after the
induction hob cools down.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages
to the induction hob.
