8
4. Adjust the heat setting by touching the slider control.
You can touch at a particular point, or by sliding your
finger up/down the slider.
• If you don’t choose a heat setting within 1
minute, the Induction hob will automatically
switch off. You will need to start again at step 1.
• You can modify the heat setting at any time
during cooking.
If the display flashes alternately with the heat setting...
• You have not placed a pan on the correct cooking zone or,
• The pan you’re using is not suitable for induction cooking or,
• The pan is too small or not properly centered on the cooking zone.
Heating does not take place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minute if no suitable pan is placed
on it.
When you have finished cooking
1.
Touch the heating zone selection
control that you wish to switch off.
2. Turn the cooking zone off by touching the slider to the left. Make sure the
display shows”0”
