13
Building into fitted kitchen units
These hobs are designed for installation in fitted kitchen units up to 600mm deep with suitable
characteristics.
Please refer to the New Zealand Gas standards for minimum clearances of the installation of gas
appliances.
The dimensions of the hob and the installation opening are shown in the illustration.
Insertions and fixing
Before inserting the hob in the installation opening, place the
special gasket around the bottom edge of the hob.
It is important to fix this gasket evenly without gaps or
overlapping, in order to prevent liquid from seeping
underneath the hob.
1)
Remove the pan stands and burners caps, and turn the
hob upside down, taking care not to damage the ignition
plugs and the thermocouples.
2)
Place the gasket around the bottom edge of the hob as
shown in the illustration on the right.
3)
Place the hob in the installation opening and push it down
so that the hob is resting firmly on the cabinet, as show in
the illustration. The side springs will hold it in place.
