Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is
designed to adjust the consumption by user. Follow the below steps.
1.
2.
Within 60 seconds after step 1, press the Program button more than 5 seconds
to enter the set model.
3.
Press the Program button to select the proper set according to your using habits ,
the sets will change in the following sequence: D3->D4->D5->D1->D2->D3.
The higher the number, the more rinse aid the dishwasher uses.
4.
Without operation in 5 seconds or press the Power button to exit the set model,
the set success.
Open the door and switch on the appliance.
10
D1
D2
D3
D4
D5
Selector position
Rinse aid level
Soak
Rapid Light bright
Soak and Rapid Light bright
90 min Light bright
90 min and Soak Light bright
Light bright
Filling The Rinse Aid Reservoir
3
Close the cap after all.
1
2
Remove the rinse reservoir cap by
lifting up the handle .
Pour the rinse aid into the dispenser,
being careful not to overfill.
