17
6.
A multiple switch with 3mm contact separationor more must be foreseen when installing
the hob.
7.
No responsibility is accepted for damage to things or injury to persons if these result from
non observance of these requisites.
Electrical connection
1.
If the appliance has a provided power supply cable,it can be used directly.Otherwise,the
proper power supply cable it can choose included:H05VV-F,H05RN-F,H05RR-F or 3 core
cable with grounding.The diameter of the cable must be at least 4mm².
2.
Use a straight screwdriver to prize up the buckle in the two square holes of the terminal
block cover,open the terminal block.See Pic 1 below.
3.
Take up the exposed junction with length of 50mm power supply cable end, to place the L
wire(brown) in connection number “3” of the cable slot,the N wire(blue) MUST be placed
in connection number “4” of the cable slot,the “green-yellow” earth wire must be
connected to the terminal marked
.Terminal block connection diagram see Pic 2
below.
4.
Use cable clamp to clamp the power supply cable,and screw tight the screws.
5.
Close and buckle the terminal block cover.
6.
Take up the other exposed junction with length of 170mm power supply cable end,then
safely connect into the preset all-pole disconnected power circuit breaker.
