background image

19

EN

Compliance Information for the European Union

(in accordance with ISO/IEC 17050-1)
No. HH2012070801

Product(s):   

PKZ Mini-Vapor BNF

Item Number(s): 

PKZU1280

Equipment class: 

1

The object of declaration described above is in 
conformity with the requirements of the specifi cations 
listed below, following the provisions of the European 
R&TTE directive 1999/5/EC, EMC Directive 2004/108/EC 
and LVD Directive 2006/95/EC

EN 301 489-1 V1.7.1: 2006
EN 301 489-17 V1.3.2: 2008
    
EN 60950-1:2006+A12: 2011

EN55022: 2010
EN55024: 2010

Signed for and on behalf of: 
Horizon Hobby, Inc.
Champaign, IL USA
July 08, 2012

(in accordance with ISO/IEC 17050-1)
No. HH2012070802

Product(s):  

PKZ Mini-Vapor RTF 

Item Number(s): 

PKZU1200

Equipment class: 

1

The object of declaration described above is 
in conformity with the requirements of the 
specifications listed below, following the provisions 
of the European R&TTE directive 1999/5/EC, EMC 
Directive 2004/108/EC and LVD Directive 2006/95/EC

EN 300-328   V1.7.1: 2006                         
EN 301 489-1 V1.7.1: 2006
EN 301 489-17 V1.3.2: 2008    

EN 60950-1:2006+A12: 2011

EN55022: 2010
EN55024: 2010

Signed for and on behalf of: 
Horizon Hobby, Inc.
Champaign, IL USA
July 08, 2012

Steven A. Hall

Executive VP – Chief Operating Officer

International Operations and Risk Management

Horizon Hobby, Inc.

Instructions for disposal of WEEE  by users in the European Union

This product must not be disposed of with other waste. Instead, it is the user’s responsibility 
to dispose of their waste equipment by handing it over to a designated collections point 
for the recycling of waste electrical and electronic equipment. The separate collection and 
recycling of your waste equipment at the time of disposal will help to conserve natural 
resources and ensure that it is recycled in a manner that protects human health and the 

environment. For more information about where you can drop off  your waste equipment for recycling, 
please contact your local city offi

  ce, your household waste disposal service or where you purchased

the product.

Declaration of Conformity

Steven A. Hall

Executive VP – Chief Operating Officer

International Operations and Risk Management

Horizon Hobby, Inc.

FCC Information

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 
(1)This device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.

CAUTION:

 Changes or modifi cations not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment.

This product contains a radio transmitter with wireless technology that has been tested and found to be 
compliant with the applicable regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz 
frequency range.

Содержание Ultra Micro Mini Vapor























Отзывы: