EN
Elevator
Bind your aircraft and transmitter before performing these tests. Move the controls on the transmitter to ensure the aircraft control surfaces move correctly.
After doing the Control Test, correctly set the failsafe. Make sure the transmitter controls are at neutral and the throttle and throttle trim are in the low position,
then rebind the model to your transmitter. If the receiver loses its link to the transmitter, the failsafe automatically moves the controls and throttle settings to
those made at binding.
Control Direction Test
Up Elevator
Down Elevator
Aileron
Stick Left
Stick Left
Stick Right
Rudder
Stick Left
Stick Left
Stick Right
Optional Flaps
Stick Left
Flaps up
Flaps Down
12
