7
© 2014 - 2024 Parktron Technology Ltd.
h.
APS main control panel: DC power supplies and APS main control board.
Figure 4
1. [PC shutdown] button: Push to turn off APS device program, operating
system program before switching off device’s main power.
2. [Soft Restart] button: Push to soft restart APS device program.
3. [DI-09] button: a spare button.
4. LP1 is a vibration detector. When a vibration within the sensing range is
detected, LED D5 will be light up, and a cabinet collision alarm will be
sent to system software. Adjust the level angle of the LP1 detector for
detection sensitivity (manually push the cabinet to observe the status
of LED D5, and adjust to an acceptable sensing range).
5. SW1/SW2: DC power main switch of APS main control board.
1
2
3
4
5
