Q
Technical data
Cordless angle
grinder:
PWSAP 20-Li A1
Rated voltage:
20 V
Rated speed n:
10000 min
-1
Rated capacity:
Ø 125 mm
Disc thickness:
max. 6 mm
Spindle thread:
M14
Weight (incl.
accessories):
2.66 kg
Battery pack:
PWSAP 20-Li A1-1
Type:
Lithium ion
Rated voltage:
20 V
max.
Capacity:
5 Ah
Number of cells:
10
Rapid battery
charger:
PWSAP 20-Li A1-2-BS
INPUT:
Rated voltage and
frequency:
100 – 240 V~,
50 – 60 Hz
Power consumption:
95 W
OUTPUT:
Rated voltage:
14.4 – 20 V
Charging current:
4 A
Charging time:
approx. 90 min
Protection class:
II /
Noise emission value:
Noise measurement value determined in
accordance with EN 60745. The A-rated noise
level of the product is typically as follows:
Sound pressure level L
pA
: 68.7 dB(A)
Uncertainty K
pA
:
3 dB
Sound power level L
WA
: 79.7 dB(A)
Uncertainty K
WA
:
3 dB
Vibration values:
Total vibration values (vector total of three
directions) determined in accordance with
EN 60745:
(main handle)
Hand/arm
vibration a
h,AG
:
4.37
m/
s
2
(auxiliary handle)
Hand/arm
vibration a
h,AG
:
5.23
m/
s
2
Uncertainty K:
1.5 m/s
2
The values apply for the work mode surface
grinding. Other applications may have different
vibration emission values
WARNING!
Wear ear protection!
WARNING!
u
The vibration level varies in accordance
with the use of the power tool and may be
higher than the value specified in these
instructions in some cases. There is a risk of
underestimation of the vibration load if the
power tool is used regularly in this manner.
Try to keep the vibration loads as low as
possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting the
working time. Wherein all states of operation
must be included (e.g. times when the power
tool is switched off and times where the
power tool is switched on but running without
load).
NOTE
u
The vibration level specified in these
instructions has been measured in
accordance with a standardised measuring
procedure specified in EN 60745 and can
be used to make equipment comparisons.
The specified vibration emission value can
also be used to make an initial exposure
estimate.
Safety warnings
Q
General power tool safety
warnings
WARNING!
u
Read all safety warnings and all
instructions.
Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
7
GB / IE / NI
Содержание PWSAP 20-Li A1
Страница 2: ...A 3 5 6 7 8 9 1 12 10 11 13 15 14 2 4 ...